Teksavvy router login lets you access the admin panel of your router by using the IP address assigned to your Teksavvy router. When you log in to your router settings, you can change the router’s WiFi password and SSID name.
Logging in to the Teksavvy Router
The process to log in to your Teksavvy Router only requires a few steps:
Step 1: Connect your Device to the Router
First, you need to make sure that your device is connected to the router. You have two ways to connect: via wired or wireless. For wired, you need an Ethernet cable which you have to link from the Ethernet port of your device to the Ethernet port of your router. Make sure it’s connected securely.
Step 2: Open your Browser
Open the browser on your device and in the address bar type the IP address assigned to your router, then hit the Enter key on your keyboard.
Here are the Teksavvy routers’ IP addresses:
| Router | IP address |
|---|---|
| SmartRG SR515AC | 192.168.1.1 |
| Calix GigaSpire BLAST | 192.168.1.1 |
| Technicolor CGA4234DGW | 192.168.100.1 |
| Arris TG3452A | 192.168.0.1 |
| Hitron CGN3/CGN3U | 192.168.0.1 |
You can also find the IP address on the back of your router if available.
Step 3: Input your Login Details
After you successfully access the login page, you will be required to enter your username and password in the fields given. If you don’t know what your username and password are, you can check the bottom or back of the router. These details are typically printed on the sticker, so you’ll see them easily.
Step 4: You will be logged in successfully
If there are no issues encountered on the login page, you can now access the settings of your router. Set up your router and configure the important settings, like wireless settings, to protect your WiFi network.
How to Change SSID Name and Password
When you successfully log in to your router, you can change the network name and password to your liking. If you don’t know how and where to start, just follow the steps below:
For Hitron CGN3:
- Log in to the router settings by entering your username and password on the login page.
- On the web panel, select Wireless
- Under Multiple SSID Settings, select the band you want you change wireless settings for. (5GHz or 2.4GHz)
- In the Network Name SSID field, enter your new network name.
- In the Password field, enter your new password.
- Click Save Changes.
Note: These steps are performed via mobile phone.
For SmartRG SR515AC:
- On the login page, enter the username and password, then click Login.
- On the web panel, select Wireless > 2.4 GHz Band > Basic.
- In the SSID field, type your new network name and click Apply/Save.
- To change the password, select Wireless > 2.4 GHz Band > Security.
- In the WPA Passphrase field, type your new password, then click Apply/Save.
Troubleshooting Common Login Issues
While performing the steps, sometimes you will face some issues, but with the right troubleshooting techniques, you will be able to fix them immediately. Here are some of the common issues you may encounter and their fixes.
- Wrong username and password: If this happens to you, just check the back of your router and see the sticker for the default login details. However, this would only work if you have changed them in the past. If you have done it already, then you need to reset your router.
- Too many login attempts: This means that you are entering the wrong login details over and over again. When you have been locked out of entering your details, just wait until the lockout time passes.
- The page cannot be reached: Probably your IP address is typed incorrectly, which is why you cannot reach the page. You can confirm if the IP address is correct by looking at the back of your router. You can also search online for the router’s default IP addresses or check your manual.
- IP Conflicts: When multiple devices are using the same IP address, you may face this issue. So, make sure there are no other devices in the network using a similar IP. To resolve this, give a static IP in the same subnet as your computer.